Fusion LX60B Pro Elysium AC/DC

Fusion LX60B Pro Elysium AC/DC

Features

Pack Cycling (Charge to Discharge / Discharge to Charge)

2-Line, 16 character, blue backlit LCD makes the screen extremely clear and legible

Built-in intelligent balancing circuit is designed to individually balance each cell on the connected lithium battery pack within the tolerance of 5mV during charge or discharge

Balancing plug adaptor boards are supplied to suit JST XH, FlightPower and Thunder Power batteries. Optional adaptors for Polyquest are available

Voltage monitoring feature shows each actual cell voltage on the screen during balancing

Various warning messages for incorrect input voltage, wrong connections, unsuitable battery condition and reverse polarity on output

Packaged in a rugged aluminium case

This is an extremely well built and complete charger it is a personal favourite of ours.

Specifications

Input Voltage: 11~15V DC, 100V~240V AC / 50~60Hz

Battery Type & Cells: 1~6 Li-Po, Li-Ion, Li-Fe / 1~14 NiCd, NiMH / 1~6 Lead-Acid cells

Battery Capacity: 100mAh ~ 6000mAh adjustable ONLY for Li-Po, Li-Ion, Li-Fe

Charge Rate: 0.1A ~ 6A Adjustable in 100mA steps (Max 50W)

Discharge Rate: 0.1A ~ 1A in 10mA steps (auto limited to 5W max)

Trickle Charge Rate: 0 ~ 200mA

Balancing Max.: Current 280mA (Tolerance 5mV during charge or discharge)

Charge Termination: 'Zero Delta V' peak detection for NiCd/NiMH 'Constant current / constant voltage' for Li-Ion/Li-Po/Li-Fe & Pb

Delta Peak Sensitivity: 5mV ~ 25mV for NiCd & 3mV ~ 25mV for NiMH (per cell)

This charger was reviewed in October 2008 by RCM&E.

Use the link below to see the review:-

http://www.logicrc.co.uk/reviews/LX60BP_RCME_102008.pdf